SWF B series LED controller

Sending files to B series machine

On your Computer

  1. Open sTx file transfer utility by double clicking the Icon on your desktop.
  2. Click browse
  3. Select the File you want to send
  4. Click Send

Progress bar starts as file is loaded then stops, and waits for you  to go to your machine and load it. Once the file starts transferring the progress bar will begin again..

At the machine

Short Version

  1. Press the EMB CALL button (or IN OUT button on Compact Machines)
  2. Press  DOWN button twice to select #3. External Input
  3. Press SET
  4. Press  DOWN button twice to select #3. Serial
  5. Press Set – the display will show ” Now Data Reading “
  6. Press Set
  7. Press Previous twice

Your file is now loaded and ready to be stitched out.

Long Version

Press the EMB CALL button (or IN OUT button on Compact Machines) the display will show the following options

1. EMB Call
2. FDD Call
3. External Input
4. External Output
5. Design Delete
6. Design Copy
7. Memory Initial

Press the green DOWN button twice to choose option “3. External Input”

Press SET - the display will show the following options

1. GNT2910
2. GNT4604
3. Serial
4. Parallel

Press the green DOWN button twice to choose option “3. Serial”

Press the SET button.

At this point it should detect that there is a connection. If the com port is not active you get the following ” Error Data Not Loading “.

Otherwise the machine will display ” Press Set To Start or Previous To Exit ”

Press Set and the machine will display “ Now Data Reading ”

When finished transferring the machine will display ” Select Empty Room ”

Press Set and the machine will display “ Design Conversion ” then ” Data Reading ”

When Complete the machine will display

1. EMB Call
2. FDD Call
3. External Input
4. External Output

Press Previous

1. GNT2910
2. GNT4604
3. Serial
4. Parallel

Press Previous

Your file is now loaded and ready to be stitched out.

Delete All File from Memory

1. Press the EMB CALL button (IN/OUT for compacts).
2. Use the DOWN button to select #7, Memory Initialize
3. Press SET – the display will ask to confirm Yes or No (Yes is the default)
4. Press SET
5. Press PREVIOUS – the display will show “NOT LOAD DESIGN”, indicating the
memory is now empty, no designs are stored.

facebooktwittergoogle_plusredditpinterestlinkedinmail

3 thoughts on “SWF B series LED controller

  1. I think this will make MORE sense if it was demonstrated……..say YOUTUBE. I need this but i dont understand it. Sorry.

  2. I keep getting Error Data NOT PENDING message on SWF 1201c when I go to the serial setting. Any idea what I am doing wrong?

Leave a Reply

Your email address will not be published. Required fields are marked *

*


+ eight = 11

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>